Chinese Academy of Engineering member, Professor
86-571-87952110
jyzh@zju.edu.cn
Room 101, Teaching Building 4
Prof. Jinyang Zheng’s career in pressure vessels has spanned 22 years. After graduation from Zhejiang University (ZJU) with Ph.D in 1992, Prof. Zheng joined the Institute of Process Equipment of ZJU and became a professor in 1997, a Qiushi Distinguished Professor in 2009, and a Chang Jiang Scholar in 2012. As a visiting scholar, he worked in the Oak Ridge National Lab from August 1999 to August 2000, the University of Manchester in U.K. from October 2002 to January 2003. Currently he is a Vice Director of National Safety Committee of Pressure Vessels, the Director of SAC/TC31/SC8 Gas Cylinders/High Pressure Vehicle Fuel Tanks, the Director of Engineering Research Center for High Pressure Process Equipment and Safety, and Board Member for three National Standard Committees ( Boiler & Pressure Vessels, Hydrogen Energy, Gas Cylinders).
Prof. Zheng has been specializing in high pressure technology, hydrogen storage and transportation, cryogenic vessels, modeling and simulation of pressure equipment under dynamic loading. Under support of many projects from the National Key Basic Research Program of China (973 program), the National High-tech Research and Development Projects (863 Program), the National Natural Science Fund, he acquired a number of important and innovative achievements in high pressure hydrogen storage, steel ribbon or fiber wound pressure equipment, polyethylene pipeline, light weight cryogenic vessels, and explosion containment vessels. He is the author of more than 200 peer reviewed papers and 12 books including 2 text books, the inventor of 60 patents, and the receiver of 16 awards from government as well as industry federation. He was also responsible for the development of 3 national regulations pressure vessels and 9 national standards.
Prof. Zheng is very active in international academic activities. He attends ASME PVPC every year since 2006, becomes session developer since 2008, and is the TPR of Codes & Standards of 2013 ASME PVPC. He has been invited by DOE to evaluate DOE-funded projects.
Research Areas
Courses
1.Chemical progress
2.Introduction to Process Equipment and Control Engineering
3.Process equipment design
4.Pressure vessel engineering optimization
5.Pressure equipment design and safety
6.Process equipment design experiment
7.Introduction to Process Equipment and Control Engineering
8.Chemical container and equipment design
Publications
paper:
1.Li, KM ; Zheng, JY* ; Zhang, ZK ; Gu, CH ; Zhang, XP ; Liu, SH ] ; Ge, HH ; Gu, CS ; Lin, GH. Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME,2017.139.6.
2.Hong, YJ ; Zhou, CS ; Zheng, YY ; Zhang, L* ; Zheng, JY* ; An, B ; Chen, XY ; Wang, XH .Hydrogen effect on the deformation evolution process in situ detected by nanoindentation continuous stiffness measurement. MATERIALS CHARACTERIZATION.2017. 127.(35-40).
3.Zhou, CL ; Zheng, JY * ; Gu, CH ; Zhao, YZ ; Liu, PF .Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY.2017.42.16( 11996-12004).
4.Hua, ZL ; Zhang, X ; Zheng, JY * ; Gu, CH ; Cui, TC ; Zhao, YZ ; Peng, WZ .Hydrogen-enhanced fatigue life analysis of Cr-Mo steel high-pressure vessels. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY.2017.42.16(12005-12014).
5.Zheng, JY*; Hou, DS ; Guo, WC ; Miao, XM ; Zhou, YD ; Shi, JF .Ultrasonic Inspection of Electrofusion Joints of Large Polyethylene Pipes in Nuclear Power Plants. Journal of Pressure Vessel Technology, Transactions of the ASME .2016.138.6
6.Guo,Jinxing ; Xing,Lijing; Hua,Zhengli ; Gu,Chaohua ; Zheng,Jinyang*.Optimization of compressed hydrogen gas cycling test system based on multi-stage storage and self-pressurized method. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY.2016.41.36(16306-16315).
7.Du, Yang ; Zhang, Fan ; Zhang, Anda ; Ma, Li ; Zheng, Jinyang*.Consequences assessment of explosions in pipes using coupled FEM-SPH method. JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES. 2016.43(549-558).
8.Zhou, Chengshuang; Huang, Qiuyan ; Guo, Qiang ; Zheng, Jinyang* ; Chen, Xingyang; Zhu, Jun; Zhang, Lin* . Sulphide stress cracking behaviour of the dissimilar metal welded joint of X60 pipeline steel and Inconel 625 alloy . CORROSION SCIENCE .2016,110(242-252).
9.Du, Yang ; Ma, Li ; Zheng, Jinyang*; Zhang, Fan; Zhang, Anda.Numerical prediction on dynamic fracture of tubes subjected to internal gaseous detonation . ENGINEERING FAILURE ANALYSIS .2016,66(489-501).
10.Chen, Xingyang; Zhou, Chengshuang; An, Bai; Zheng, Jinyang*; Zhang, Lin*.An apparatus for detecting hydrogen desorption from metals during deformation. VACUUM .2016,128(128-132).
11.Zheng, Jinyang*; Zheng, Xin; Xu, Ping ; Gu, Chaohua; Wu, Bing; Hou, Yongping; Standardized equation for hydrogen gas compressibility factor for fuel consumption applications. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY .2016,41,15(6610-6617).
12.Du, Yang;Ma, Li; Zheng, Jinyang*; Zhang, Fan; Zhang, Anda. Coupled simulation of explosion-driven fracture of cylindrical shell using SPH-FEM method.INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING .2016,139(28-35).
13.Zheng, JY; Hou, DS ; Zhong, SJ ; Shi, JF ; Li, GZ . Effect of viscoelasticity on the hold pressure of plastic pipe reinforced by cross helically wound steel wires in leak test. COMPOSITE STRUCTURES.2015,133(756-763).
14.J.Y. Zheng, S.J. Zhong, J.F. Shi, W.C. Guo. Study on the Allowable Temperature for Preventing Over Welding During Thermal Welding of Polyethylene Pipe. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015. 137(2).
15.J.Y. Zheng, J. Shi, J.F. Shi, S.J. Zhong, J. Rao, G.Z. Li, X. Li. Short-term burst pressure of polyethylene pipe reinforced by winding steel wires under various temperatures. COMPOSITE STRUCTURES , 2015. 121: p. 163-171.
16.X.P. Luo, S.L. Lu, J.F. Shi, X. Li, J.Y. Zheng. Numerical simulation of strength failure of buried polyethylene pipe under foundation settlement. ENGINEERING FAILURE ANALYSIS, 2015,48: p.144-152.
17.Zheng, Jinyang; Hu, Yang; Ma, Li; Du, Yang. Delamination failure of composite containment vessels subjected to internal blast loading. Composite Structures, 2015, 130: p. 29-36.
18.Z. Q. Cui, Y. Z. Zhao, Y. C. Chen, X. Liu, Z. L. Hua, C. L. Zhou, J. Y. Zheng. Transition of axial segregation patterns in a long rotating drum. Particuology, 2014. 13: p. 128-133.
19.X. P. Luo, J. J. Ma, J. Y. Zheng, J. F. Shi. Finite Element Analysis of Buried Polyethylene Pipe Subjected to Seismic Landslide. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014. 136(3).
20.L. Ma, Y. Hu, Y. Du, J. Y. Zheng. Fracture Mode Transition for Explosively Loaded GB/JB 20 Steel Containment Vessels. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014. 136(3).
21.J. Y. Zheng, L. Zhao, K. S. Ou, J. X. Guo, P. Xu, Y. Z. Zhao, L. Zhang. Queuing-based approach for optimal dispenser allocation to hydrogen refueling stations. International Journal of Hydrogen Energy, 2014. 39(15): p. 8055-8062.
22.Luo, XP, Zheng, JY, Xu, P , Guo, WC , Shi, JF. Prediction on short-term burst pressure of plastic pipe reinforced by cross-winding steel wires. CONSTRUCTION MATERIALS AND STRUCTURES, 2014, p.1256-1263.
23.Zheng, Shuqi; Zhou, Chengshuang; Chen, Xingyang; Zhang, Lin; Zheng, Jinyang; Zhao, Yongzhi. Dependence of the abnormal protective property on the corrosion product film formed on H2S-adjacent API-X52 pipeline steel. International Journal of Hydrogen Energy,2014, 39( 25): p 13919-13925.(EI: 20143418079877)
book:
1.Jinyang Zheng, Xiang Li, Jianfeng Shi. Wire-wound reinforced plastic composite pipe. Beijing: Chemical Industry Press, 2012
2.Pengfei Liu, Jinyang Zheng. Mechanical Strength and Optimal Design of Complex Structure. LAMBERT Academic Publishing, 2010
3.Jinyang Zheng, Xiakang Ma, Xieping Yin. Long-distance pipeline safety-risk identification evaluation control. Beijing: Chemical Industry Press, 2004
4.Jinyang Zheng, edited by Chen Zhiping. Special Pressure Vessels. Beijing: Chemical Industry Press, 1997
5.Guohui Zhu, Jinyang Zheng. New type of wound-belt pressure vessel. Beijing: Mechanical Industry Press, 1994
6.Jinyang Zheng, Zhifu Sang, ed. Process Equipment Design (Fourth Edition). Beijing: Chemical Industry Press, 2015 ("Twelfth Five-Year" National Planning Textbook)
7.Jinyang Zheng, Qiwu Dong, Zhifu Sang, ed. Process Equipment Design (Third Edition). Beijing: Chemical Industry Press, 2010 ("Eleventh Five-Year" National Planning Textbook)
8.Jinyang Zheng , Qiwu Dong, Zhifu Sang, ed. Process Equipment Design (Second Edition). Beijing: Chemical Industry Press, 2005 ("Tenth Five-Year" National Planning Textbook)
9.Jinyang Zheng,Qiwu Dong, Zhifu Sang, ed. Process Equipment Design (first edition). Beijing: Chemical Industry Press, 2001
10.Jinyang Zheng participated in the preparation (completed 160,000 words) chemical container and equipment design. Hangzhou: Zhejiang University Press, 1996
11.JinyangZheng, Guoyou Sun, Zhiwei Chen, etc. A practical guide to EU pressure equipment. Beijing: Chemical Industry Press, 2005
12.Jinyang Zheng , Ping Xu, Xiaobin Fang, etc. ASME Pressure Vessel Design Guide. Beijing: Chemical Industry Press, 2003
Awards
1. Design, manufacture and maintenance of important pressure vessels under extreme conditions, the first prize of National Science and Technology Progress Award in 2014
(Xuedong Chen, Shandong Tu, Jinyang Zheng, Zhichao Fan, Fuzhen Xuan, Binan Shou, Yongdong Chen, Wen Gu, Bing Wang, Zhiping Chen, Bing Han, Guoyi Yang, Jun Cui, Xiaoyu Zhang, Xiujie Li)
2. Key technologies and engineering applications for lightweight design and manufacture of heavy pressure vessels, the second prize of National Science and Technology Progress Award in 2017
(Jinyang Zheng, Zhichao Fan, Binan Shou, Yuli Liu, Yongdong Chen, Weiming Zhou, Chonggang Chen, Hu Hui, Caixing Shi, Nongji Liu)
3. The key technology and industrialization of strain strengthening of austenitic stainless steel cryogenic vessels, the first prize of scientific and technological progress of the Ministry of Education's scientific research outstanding achievements award in 2013
(Jinyang Zheng, Binan Shou, Li Ma , Weiming Zhou, Chunfeng Liu, Caixing Shi, Zhaohui Chen, Cunjian Qu, Haoming Wang, Yongxin Luo, Ping Xu, Liang Sun, Jianjun Ye, Jian Yang, Yang Yang, Pengfei Liu, Wei Wei, Chaohua Gu,Tao Li)
4. Key technology and application of 70MPa high-pressure gas storage hydrogen storage system, first prize of scientific and technological progress of the Ministry of Education's scientific research outstanding achievement award in 2010
(Jinyang Zheng, Xinhua Wang,Pengfei Liu, Yongzhi Zhao , Xiaoru Ye , Jiang Jiang, Chunhua Wei, Lifang Zhang, Ping Xu, Jian Yang, Lixin Chen, Qingfeng Wu, Yanlei Liu, Xianxin Liu, Haiyan Bei, Jianjun Ye)
5. Key technology and industrialization of high-parameter wire-wound reinforced polyethylene composite pipelines under severe working conditions. First Prize of Technical Invention of China Petroleum and Chemical Industry Federation in 2014
(Jinyang Zheng, Jianfeng Shi, Taiqing Shao, Guangzhong Li, Yijin Luo, Weican Guo, Weijun Qiu , Xiang Li ,Jun Shi)
6. Safety testing and evaluation methods for polyolefins and their composite pipelines, first prize of technical invention of China Petroleum and Chemical Industry Federation in 2012
(Zheng Jinyang, Shi Jianfeng, Ding Shoubao, Guo Weican, Gao Jixuan, Ding Liangyu)
7. Process equipment design core curriculum innovation construction and leading development for 20 years, 2016 Zhejiang Higher Education Teaching Achievement First Prize
(Jinyang Zheng, Zhiping Chen, Chaohua Gu, Pengfei Liu, Jian Yang, Shuiying Zheng)
8. Key technology and industrialization of large-diameter high-pressure natural gas seamless cylinder for flushing vehicle, first prize of Zhejiang Science and Technology Award 2010
(Xiakang Ma, Jinyang Zheng, Zengliang Gao, Jiancan Zhou, Xieping Yin, Xiaobin Fang, Jianxing Ge, Yubin Zhang, Zhiwei Chen, Banyuan Xu, Dongsheng Jiang, Weiying Fang)
9. Container strain strengthening system and its austenitic stainless steel cryogenic container, 2017 China Patent Excellence Award
(Jinyang Zheng, Chunfeng Liu, Ping Xu, Caixing Shi, Jian Yang, Haoming Wang, Jin Yang, Yuan Fang)
10. GB150.1-2011 Pressure Vessel Part I: Four Standards, General Requirements, First Prize of 2014 China Standard Innovation Contribution Award
(BiNan Shou, Guoyi Yang, Feng Xu, Xuedong Chen, Xiaozhong Qin, Jinyang Zheng , Jun Cui, Mingde Xue, Tiejun Xie, Shiyu Li )
Research
1. National Key Basic Research and Development Program (973 Program) Project. Basic research on design and manufacture of large-scale bearing parts for high-pressure hydrogen systems, 2015CB057600
2. Key Projects of the National High Technology Research and Development Program (863 Program). Key Technology Research on Risk Assessment and Life Prediction of Major Pressure Equipment under Extreme Conditions, 2009AA044801
3. National Key Basic Research and Development Program (973 Program). High-density Vehicle Hydrogen Storage System and Its Safety Prediction Theory Research, 2007CB209706
4. National Science and Technology Support Program Project. Key Technology Research on Defect Detection and Damage Assessment of Polyethylene Pipeline, 2006BAK02B01-03
5. Special funded projects for national public welfare industries. Standard basic research on filament wound high-pressure hydrogen cylinders for vehicles (10-131)
6. National Natural Science Foundation of China. Research on damage evolution and life of cylindrical composite containers under internal explosive loading (50875236)
7. The goal of the National High Technology Research and Development Program "863 Program". High-pressure container hydrogen storage technology and equipment (2006AA05Z143)
8. Safety Issues Related to Transport and Storage of Hydrogen Fuels in Northern Climates (US DOT DTOS59-06-G-00048)
9. China International Marine Containers (Group) Co., Ltd. Austenitic stainless steel strain-enhanced cryogenic vessels (deep-cooled storage tanks, deep-cooled tankers, deep-cooled containers)
