一、 期刊论文
(1) Riwu Yao, Jianfeng Shi* and Jinyang Zheng, Curing quality monitoring and loading detection of composite structures with embedded capacitive sensor array. Materials & Design, 2021: p. 110321.
(2) Jianfeng Shi, Sijia Zhong, Xinyu Nie, Jun Shi, and Jinyang Zheng, Study on steel wire reinforced thermoplastic pipes under combined internal pressure and bending moment at various temperatures. Thin-Walled Structures, 2021. 169: p. 108381.
(3) Jianfeng Shi, Riwu Yao, Zhiyong Kong, Fengyao Ni, and Jinyang Zheng, Strength Analysis on Hybrid Welding Interface of Polymer and Short Carbon Fiber Reinforced Composite. Journal of Materials Science, 2021. 56(26): p. 14556-14569.
(4) Jianfeng Shi, Zhoutian Ge, Zhenlei Ni, and Jinyang Zheng*, Burst Pressure of Glass Fiber Tape Reinforced Polyethylene Pipes with Interlayer Delamination Defect. Journal of Pressure Vessel Technology, Transactions of the ASME, 2021. 143(6).
(5) Yue Zhang, Jianfeng Shi* and Jinyang Zheng, A method of fracture toughness JIC measurement based on digital image correlation and acoustic emission technique. Materials & Design, 2020. 197, 109258
(6) Jianfeng Shi, Anqi Hu, Fa Yu, Ying Cui, Ruobing Yang, and Jinyang Zheng, Finite Element Analysis of High-Density Polyethylene Pipe in Pipe Gallery of Nuclear Power Plants. Nuclear Engineering and Technology, 2021. 53(3): p. 1004-1012.
(7) Yinkang Qin, Jianfeng Shi*, Jinyang Zheng, Dongsheng Hou, Weican Guo, An improved phased array ultrasonic testing technique for thick-wall polyethylene pipe used in nuclear power plant, Journal of Pressure Vessel Technology, Transactions of the ASME, 2019. 141(4), 041403.
(8) Jinyang Zheng, Yue Zhang, Dongsheng Hou, Yinkang Qin, Weican Guo, Chuck Zhang, and Jianfeng Shi*, A review of nondestructive examination technology for polyethylene pipe in nuclear power plant. Frontiers of Mechanical Engineering, 2018. 13(4): p. 535-545.
(9) Yue Zhang, Xiangpeng Luo and Jianfeng Shi*, Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis. Journal of Pressure Vessel Technology, Transactions of the ASME, 2018. 140(3): p. 031406.
(10)Jie Zhang, Jianfeng Shi* and Ping Xu, Investigation on interfacial debonding between steel wire and adhesive resin. Journal of Applied Polymer Science, 2017. 124(33): 45064-45072.
(11)Xinyu Nie, Dongsheng Hou, Jinyang Zheng, Jianfeng Shi* and Chuck Zhang. Eigen-line in welded structures of thermoplastic polymers. Polymer Testing. 2017. 57: p. 209-218.
(12)Jinyang Zheng, Dongsheng Hou, Weican Guo, Xiaoming Miao, Yaoda Zhou and Jianfeng Shi*. Ultrasonic Inspection of Electro-fusion Joint of Large Size Polyethylene Pipe in Nuclear Power Plant. ASME Journal of Pressure Vessel Technology. 2016. 138(12): p. 060902-1.
(13)Jinyang Zheng, Dongsheng Hou, Sijia Zhong, Jianfeng Shi*, Guangzhong Li. Effect of viscoelasticity on the hold pressure of plastic pipe reinforced by cross helically wound steel wires in leak test. Composite Structures, 2015. 133: p. 756-763.
(14)Jinyang Zheng, Jun Shi, Jianfeng Shi*, Sijia Zhong, Jing Rao, Guangzhong Li. Short-term burst pressure of polyethylene pipe reinforced by winding steel wires under various temperatures. Composite Structures, 2015. 121: p. 163-171.
(15)Xiangpeng Luo, Shunli Lu, Jianfeng Shi*, Xiang Li, Jinyang Zheng. Numerical simulation of strength failure of buried polyethylene pipe under foundation settlement. Engineering Failure Analysis, 2015. 48: p. 144-152.
(16)Jinyang Zheng, Sijia Zhong, Jianfeng Shi* and Weican Guo, and. Study on the Allowable Temperature for Preventing Over Welding During Thermal Welding of Polyethylene Pipe. ASME Journal of Pressure Vessel Technology. 2014. 137(4): p. 021401.
(17)Xiangpeng Luo, Jinjin Ma, Jinyang Zheng, Jianfeng Shi*. Finite element analysis of buried polyethylene pipe subjected to seismic landslide. ASME Journal of Pressure Vessel Technology. 2014. 136(6): p. 31801.
(18)Jianfeng Shi, Jinyang Zheng and Weican Guo, Safety assessment of cold welding defect in electro-fusion joint of polyethylene pipe. ASME Journal of Pressure Vessel Technology. 2013. 135(5), p. 051403.
(19)Jianfeng Shi, Jinyang Zheng, Weican Guo and Jun Shi, Defects classification and failure modes of electrofusion joint for connecting polyethylene pipes. Journal of Applied Polymer Science, 2012. 124(5): p. 4070-4080.
(20)Jianfeng Shi, Jinyang Zheng and Weican Guo, Formation mechanism of the Eigen-line in electrofusion joints of polyethylene pipes. ASME Journal of Pressure Vessel Technology, 2011. 133(5): p. 051403.
(21)Jianfeng Shi, Jinyang Zheng, Weican Guo, Ping Xu, Yongquan Qin and Shangzhi Zuo, A model for predicting temperature of electrofusion joints for polyethylene pipes. ASME Journal of Pressure Vessel Technology, 2009. 131(6): p. 61403.
(22)施建峰, 冯颖, 陶杨吉, 郑津洋, 梁琳, 聚乙烯管道无损检测技术标准进展. 压力容器, 2021. 38(10): p. 66-75.
(23)施建峰, 胡安琪, 郑津洋, 聚乙烯管材标准发展现状分析. 中国塑料, 2021. 35(03): p. 112-123.
(24)施建峰, 陶杨吉, 安成名, 方海清, 郑津洋, 聚乙烯燃气管道超声相控阵检测工程应用案例分析. 压力容器, 2020. 37(12): p. 54-62.
(25)胡安琪, 于发, 杨若冰, 施建峰*, 崔莹, 郭伟灿, 郑津洋, 核电厂聚乙烯管道设计方法及标准简介. 中国塑料, 2020. 34(3): p. 67-77.
(26)郭伟灿, 胡裕锐, 缪存坚, 施建峰*, 聚乙烯电熔接头管材熔融区深度与焊接性能关系研究. 中国塑料, 2019. 33(12): p. 58-62.
(27)胡安琪, 聂新宇, 姚登樽, 陈贤朋, 郑津洋, 施建峰*, 聚乙烯燃气管道电熔接头熔区应力分析. 压力容器, 2019. 36(05): p. 21-28.
(28)聂新宇, 胡安琪, 姚登樽, 施建峰*, 聚乙烯及其复合管电熔接头的失效模式与爆破压力研究. 中国塑料, 2019. 33(06): p. 63-68.
(29)倪振磊, 施建峰*, 邓贵德, 刘应华, 程光旭, 陈学东, 范志超, 贾国栋, 郑津洋, 2019年ASME PVP会议简介. 压力容器, 2019. 36(10): p. 71-78.
(30)秦胤康, 施建峰*, 侯东圣, 郑津洋, 郭伟灿, 核电站用PE-HD管水压试验压力变化规律研究. 中国塑料, 2018. 32(01): p. 77-83.
(31)秦胤康, 施建峰*, 邓贵德, 刘应华, 程光旭, 陈学东, 范志超, 贾国栋, 涂善东, 郑津洋, 2018年ASME PVP会议简介. 压力容器, 2018. 35(09): p. 70-77.
(32)邱平, 施建峰*, 郑津洋, 邓贵德, 刘应华, 程光旭, 陈学东, 范志超, 贾国栋, 2017年ASME PVP会议简介. 压力容器, 2017. 34(09): p. 73-79.
(33)聂新宇, 鲁顺利, 施建峰*, 郑津洋, 聚乙烯管接头特征线弹性模量的微米压痕表征. 压力容器, 2017. 34(2): p. 8-13.
(34)张捷, 聂新宇, 徐平, 侯东圣, 施建峰*, 郑津洋, 模拟海洋复杂载荷条件复合管道性能测试装备. 压力容器, 2017. 34(1): p. 1-6.
(35)徐淮建, 陆群杰, 郑津洋, 施建峰*, 陈学东, 贾国栋, 2016年ASME PVP会议简介. 压力容器, 2016. 33(08): p. 75-80.
(36)郑津洋, 鲁顺利, 马津津, 施建峰*, 占压下埋地聚乙烯管力学响应的数值模拟. 中国塑料, 2014. 28(1): p. 60-64.
(37)郑津洋, 郝宇杰, 陈学东, 陈志平, 施建峰. 美国机械工程师协会2010年压力容器与管道会议简介. 压力容器, 2010(9): p. 51-54.
(38)施建峰, 郭伟灿, 师俊, 钟思嘉, 郑津洋, 聚乙烯及其复合管道安全检测与评价方法. 化工学报, 2012. 64(2): p. 756-764.
二、 会议论文或学术报告
(1) Zhoutian Ge, Riwu Yao, Jianfeng Shi*, and Jinyang Zheng, A Comprehensive Review on Failure Analysis of Electrofusion Joint for Plastic Pipes, Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. 2021: Online.
(2) Yurui Hu, Guangte Xiang, Jianfeng Shi*, and Jinyang Zheng, Influence of Resistor Wire on the Maximum Stress in Electrofusion Joint, Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. 2021: Online.
(3) Guangte Xiang, Yurui Hu, Jianfeng Shi*, and Jinyang Zheng, Demonstration of Intelligent Welding Machine for Polyethylene Pipe, Proceedings of the ASME 2021 Pressure Vessels & Piping Conference. 2021: Online.
(4) Jianfeng Shi, Yangji Tao, Weican Guo, and Jinyang Zheng, CNN based defect recognition model for phased array ultrasonic testing images of electrofusion joints, Proceedings of the ASME 2020 Pressure Vessels and Piping Conference. 2020, ASME: Minneapolis, Minnesota (Outstanding Technical Paper for PVP 2020: Materials & Fabrication)
(5) Zhenlei Ni, Jianfeng Shi and Jinyang Zheng, Burst Strength of Glass Fiber Reinforced Polyethylene Pipes with Delamination Defect, in Proceedings of the ASME 2019 Pressure Vessels and Piping Conference. 2019, ASME: San Antonio, Texas, USA.
(6) Riwu Yao, Jianfeng Shi and Jinyang Zheng, Mechanical Enhancement and Strain Sensing of Electrofusion Joint with Carbon-Fiber-Reinforced Polyethylene, in Proceedings of the ASME 2019 Pressure Vessels and Piping Conference. 2019, ASME: San Antonio, Texas, USA.
(7) Riwu Yao, Zhenlei Ni, Jianfeng Shi*, Chuck Zhang, Xuzhou Jiang, Jarod Weber, Ben Wang, and Jinyang Zheng, Embedded Capacitance Sensor Array for Structural Health Monitoring of Glass Fibre Reinforced Composites, in 7th Asia-Pacific Workshop on Structural Health Monitoring. 2018: Hong Kong SAR, P.R. China.
(8) Jialei Chen, Jianfeng Shi and Chuck Zhang, Design and Optimization of High-Pressure Hydrogen Cylinders for Intermodal Container Transportation, in Proceedings of the ASME 2018 Pressure Vessels and Piping Conference. 2018, ASME: Prague, Czech Republic.
(9) Yinkang Qin*, Jianfeng Shi and Jinyang Zheng, An Improved Phased Array Ultrasonic Testing Method for Thick-Wall Polyethylene Pipe Used in Nuclear Power Plant, in Proceedings of the ASME 2018 Pressure Vessels and Piping Conference. 2018, ASME: Prague, Czech Republic.
(10)Jianfeng Shi, Jinyang Zheng, Weican Guo, Dongsheng Hou and Yingkan Qin, Non-destructive Inspection of high density polyethylene pipe in nuclear power plant, International Plastic Pipe Conference, 2017, Hangzhou, China (大会邀请报告)
(11)Ping Qiu*, Jianfeng Shi and Jinyang Zheng, Experimental Investigation On Adhesive Bonded Joints of Carbon Fiber Composite Laminates Containing Disbond Defect, ASME Pressure Vessels and Piping Conference. 2017, ASME: Hawaii, United States.
(12)Yue Zhang*, Xiangpeng Luo and Jianfeng Shi, Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis, ASME Pressure Vessels and Piping Conference. 2017, ASME: Hawaii, United States.
(13)Jarod Weber*, Jianfeng Shi and Chuck Zhang, Embedded Capacitance Sensor Array for Structural Health Monitoring of Pipeline Systems, ASME Pressure Vessels and Piping Conference. 2017, ASME: Hawaii, United States.
(14)Jie Zhang*, Jianfeng Shi and Jinyang Zheng, Failure Analysis on Plastic Pipe Reinforced by Cross Helically Wound Steel Wire Subjected to Internal Pressure and Bending Load, ASME Pressure Vessels and Piping Conference. 2016, American Society of Mechanical Engineers: Vancouver, Canada.
(15)Xiangpeng Luo*, Jianfeng Shi, Jinyang Zheng. Mechanism of slow crack growth in polyethylene: A finite element approach. ASME Pressure Vessels and Piping Conference. 2015. Boston, Massachusetts, America: American Society of Mechanical Engineers.